Maintenance work of E-Waste Hammer Crusher

Maintenance work of E-Waste Hammer Crusher
E-Waste Hammer Crusher is a kind of equipment for crushing materials in the form of impact. It is divided into two types: double rotor and single rotor. E-Waste Hammer Crusher is a high-speed rotating crushing machine, suitable for crushing medium hardness materials in metallurgy, chemical industry, cement, electric power and other industrial sectors. During operation, to ensure its normal operation, we operate strictly in accordance with the regulations and Do a good job in the maintenance of the equipment.
(1) Check the lubrication situation frequently to keep the lubrication system in good condition.
(2) The temperature of the rotor bearing should be kept below 60°C, and the temperature should not exceed 70°C. If the temperature is too high, the cause should be found out and measures should be taken to eliminate it in time.
(3) Always check whether all liner bolts and anchor bolts of the equipment are loose, and tighten them in time if they are loose.
(4) Pay attention to check whether the discharge particle size meets the quality requirements. If not, replace the grate bar or adjust the height of the grate bar bracket.
(5) To keep the feed evenly, be careful not to feed metal debris.
(6) If you want to start an empty car, pay attention to emptying the material in the crushing cavity before stopping the machine.
(7) Get in touch with the upper and lower procedures related to the machine before driving and stopping, and perform correct operations in the order of driving and stopping.
(8) Frequently check the use of lining plates, hammers and other wearable parts. If any problems are found, they must be dealt with in time.